// multi-utility computation suite · offline · instant · precise
┌──────────────────────────┐
│ [c] calcalyst_ │
│ computation suite │
└──────────────────────────┘
// select a module to initialize
/ search↵ open firstesc close
// adsenseEMPTY_LEADER_SLOT728×90
// adsenseMOBILE_ANCHOR_SLOT320×50
// keyboard_shortcuts
/focus search
↑↓navigate module list
Enter
open first result from search
open highlighted
compute when module is open
compute when focused in a field
Escclose module · clear selection
⌫
eng.centrifuge-g-force Calculator
Calculates centrifuge G-force from RPM and rotor radius, and converts between RPM and G-force. A centrifuge at 10,000 RPM with a 10 cm rotor develops approximately 11,000 G — G-force increases with both RPM squared and radius.
Inputs
Rpm
Rate of movement. 1 m/s = 3.6 km/h = 2.237 mph.
Radius Cm
Distance from centre to edge of a circle. Radius = diameter / 2.
Sample Density
Mass per unit volume (kg/m³). Water: 1,000. Air: 1.225. Steel: 7,850. Affects buoyancy, flow, and structural loads.
Results
relative centrifugal force (g)
The value at the specified point or condition.
angular velocity ω (rad/s)
Sample size or count used in the calculation.
tip velocity (m/s)
Gratuity amount — the suggested amount to add to the bill as a service tip.
RCF = ω²r/g
Reference formula or conversion factor shown for context.
typical applications
Recommended use case or application for this configuration or result.
k-factor
A dimensionless multiplier applied in the calculation.